Skip to main content

ZG1D To ZG2D Conversion Kit

$131.60

Clear

*Click Body Color, then Side Panel Color to View Arm Color Selected

**Click on the Infinite Designer to specify your monitor arm in any color, design, logo, label, QR code or any other graphic.

Not sure which arm to choose?
View our monitor planning guide

ZPX Series Specifications

ZP1 Single, Post Mounted Monitor Arm

  • Maximum Arm Weightload:

    24.3 lbs.

  • Maximum Post Weightload:

    90 lbs.

  • Arm Support:

    Up to 3 monitor per row, 2 rows, 6 monitors

  • Monitor Height Adjustment Range:

    Total: 11.7”, 5.9” above and 5.8” below mounting point

  • Monitor Depth Adjustment Range:

    24.9” fully extended to 3.4” in front of post

  • Arm Length:

    Straight: 13.9” / Straight/Straight: 24.3” / Straight/Dynamic: 24.9”

  • Post diameter:

    1.7”

  • Monitor Mount (Shoulder) Length:

    Centerpoint of post to centerpoint of arm insert: 2.8”

  • Post Heights:

    12” for single Row, 24” for Dual Row

  • Zslider VESA Plate Adjustment:

    9” of lateral adjustment at end of arm

  • Mounts Available:

    Clamp Mount, Sliding Desk Clamp Mount, Bolt-Through Mount, Rail Mount

  • Monitor Support Brackets:

    Individual “Shoulders” slide vertically along full length of post and lock into place tool-lessly using a locking lever

  • Cable Management:

    Full length of post, with slotting for ease of installation or removal Full length of each Monitor Arm link, with easy access to right and left for installation or removal

  • Materials:

    Aluminum, ABS, POM, Nylon and Steel

  • Sustainability:

    29% recycled and 99% recyclable content

  • Installation Tools placement:

    Hidden in the top post, suspended from top cap

  • Warranty:

    10-Year

  • VESA Compliance:

    75mm and 100mm

  • Dual Rotation Stops:

    180° and 360° (no stop) at both center and rear joints for enhanced safety

​